Check and clean the Injection Tube.

Note: This will take 30-45 minutes.

• Step 1

• Turn the steamer off and allow it to cool down completely.

• 

• Step 2

• Insert a straightened paper clip into the Injection Tube opening no more than 1 ½ inches deep. Remove the paper clip.

• 

• Step 3

• Turn the unit on and allow it to warm up. (See graphic for Step 1)

• Step 4

• Run two or three steam cycles by pressing the Steam Activation Button to force out any obstructions from the tube. Repeat this process as needed.

•